Marble dingy and needs polishing? Soft marble is more likely to get soiled or scratched, but a soft cloth, soapy water, or a stone cleaner can clean it. Knowing how to properly care for marble before using anything other than water to clean it at home is important. What follows is a guide that will show you how to clean your home daily and eliminate unsightly blemishes and scratches.
Routine Maintenance and Cleaning
Every Day, Use Water And Dish Soap To Clean Your Marble.
Put some mild, non-abrasive dish soap in a spray bottle full of warm water. About one tablespoon. Spritz the surface with the soapy water and wipe it down with a delicate microfiber towel. If your rag becomes soiled during wiping, wash it thoroughly before using it again.
- Clean a marble floor with soapy water and a bigger microfiber cloth.
- When cleaning a marble fireplace, soapy water is usually effective enough to eat through soot.
- Marble is sensitive to acidic cleaners like lemon juice and vinegar, so avoiding using them is best.
Use A Damp Cloth To Wipe Up The Soapy Water.
Wipe the area down with a clean, wet, non-abrasive cloth. Soap residue can diminish the look of marble if left to dry on the surface, so removing as much of it as possible is important.
- If you’re mopping a marble floor, start with a fresh mop head or squeeze the water out of the old one very well.
Use A Microfiber Towel To Wipe Off The Marble countertop.
Ensure no lingering water spots are left by going over the surface with a dry towel. Check if the stone still has a damp sensation by running your fingers over it after you’ve dried it.
- Marble is porous and can be stained if water is left on the surface.
Once A Week, Use Commercial Marble Cleaner In Place Of Dish Soap.
Apply your marble cleaner in a thin, even coat by spraying it on the surface. Apply the cleaner to your marble by rubbing it in using a dry cloth, such as a microfiber towel. Maintain the marble’s lustre and keep it stain-free by using the cleaner at least once a week.
- Always read and follow the specific instructions on the cleaner’s container.
- Bleach and mineral spirits are two common household cleansers to avoid since they can etch marble.
Removal of Stains
Ammonia And Hydrogen Peroxide At A Concentration Of 12% Can Remove Organic Stains.
Wet marble surfaces with hair-bleaching hydrogen peroxide and a few drops of ammonia to remove coffee, tea, and food stains. Rub the stain with the solution on a microfiber cloth until it comes up.
- Stains are easier to remove when treated quickly after they occur before they have had a chance to set.
- Hydrogen peroxide and ammonia make a good cleaning combination, but you shouldn’t use ammonia with bleach or other cleaning products because it might produce harmful fumes.
Baking Soda And Hydrogen Peroxide Are Effective At Removing Oil Stains.
Baking soda and hydrogen peroxide can be blended into a thick paste to remove cooking oil, grease, and cosmetic stains. The oil stain can be treated overnight by applying the paste and then drying it. The discolouration can be removed the next day by scraping the dry material of the marble with a plastic putty knife.
- The stain will fade, and the marble will lighten with baking soda and peroxide.
- First, ensure that the mixture of peroxide and baking soda will not leave any marks or harm on the marble by testing it in a discrete surface area.
Rust Stains Can Be Removed Using A Poultice Containing Rust Remover.
Use equal portions of poultice powder and rust remover to make a rust-removing poultice. Completely cover the rust stain with the poultice and leave it to dry overnight. You only need a putty knife or a clean cloth when you want to remove the poultice the next day.
- Another poultice application may be necessary if the rust stain on your marble persists. If the stain keeps showing up, it may have set into the surface permanently.
Polishing Powder For Marble Will Remove Etch Marks.
Acids can etch the surface of stone, leaving behind ugly discolourations. Lightly dust some marble polishing powder over the area where you made the etch marks. Wet a microfiber cloth corner to massage the powder into the stone and rub it circularly. The etch mark will be erased, and the marble will shine if you continue to rub the powder.
Removing Scratches
To Fix Minor Dings And Scratches, You Can Use a Polishing Compound.
Sprinkle polishing chemicals on the damaged area to remove scratches from the marble. Using a damp microfiber cloth, apply the compound to the marble in circular motions. Once the marble has a smooth appearance, the remaining powder should be wiped away.
- Larger surfaces, such as a marble floor or a huge tabletop, can benefit from the faster application of polishing powder when using a rotary buffer.
Steel Wool Can Be Used To Remove Surface Scratches.
Avoid scratching your countertops by keeping the steel wool damp. Steel wool can remove minor scratches from a surface by gently rubbing it over the area. To avoid wasting time, regularly lift the steel wool and inspect the surface to make sure the scratches have been removed.
- Steel wool is abrasive and could scratch your marble, so some manufacturers advise against it. Testing the steel wool on an inconspicuous part of the marble before putting it on a scratch is recommended.
If The Cracks In Your Marble Are Too Deep For You To Fix, Call A Professional.
If the chip is too big or the scratch is too deep for you to remove on your own, it’s best to have a professional take a crack at it. Contact stone experts in your area or the product’s original maker to enquire about possible restoration options.
Damage Prevention
Clean Up Any Spills As Soon As You Notice Them.
Marble can become stained quickly, so removing any spills as soon as possible is important. Clean the surface with water after blotting off excess moisture to remove residue. After that, use a paper towel to dry your marble.
Put Everything You Want To Protect Your Marble Surfaces From Scratches On Coasters Or Trays.
Use a coaster to prevent your marble countertops and tables from getting water spots when entertaining with cups and mugs. Use a tray to safeguard your marble bathroom counter when making a creative display of toiletries.
- Coasters can protect your marble surfaces from water rings left by glasses and cups.
Do Not Place Cookware Directly On Marble Countertops; Use Hot Pads Instead.
Marble countertops are susceptible to damage from hot cookware. Use a heated pad made of wood or fabric to protect your surfaces from the stone.
The Dos and Don’ts of Marble Cleaning
Knowing the proper care and cleaning procedures for your marble countertops is essential if you are fortunate enough to have them in your house.
Marble countertops are easy to clean. Still, it is necessary if you want them to retain their lustre and beauty for as long as possible.
While cleaning your countertops, keep in mind these three “dos” and three “don’ts”:
Protecting Your Marble Countertops Is A Must.
Taking precautions to avoid spills and stains is a simple method to maintain clean countertops. Seal your marble counters and wipe up any spills immediately. Use coasters and hot pads under containers containing liquids.
Do Use A Basic Cleaning Product
Cleaning marble countertops is as simple as using a chamois, a soft cloth, warm water, and a non-abrasive, high-end cleaning product. Cleaning the counters is as simple as combining the cleaning solution with water, wiping them down, and finishing with a chamois.
Keep Your Marble Shining!
Polishing marble is a simple yet effective approach to bring out its natural beauty. A damp chamois or baking soda and chalk paste will do the trick.
Don’t Buy Cheap, Off-Brand Commercial Cleaning Supplies
Compared to their more expensive namesakes, generic cleaning solutions are more wallet-friendly. Please stay away from them. Many have alkalis and acids that will etch and wear down your counters. Use only high-quality cleaning chemicals on your marble countertops to preserve their beauty.
Avoid Using Multi-Purpose Items
Marble countertops, it has been said, can be cleaned using white vinegar, bleach, or ammonia. Even while it’s possible, you really shouldn’t. Using all-purpose cleaners on your countertops might harm them over time and reduce their lustre. Choose your agents carefully.
Avoid The Use Of Scouring Powder And Pads
While it may be tempting to use abrasive cleaning equipment on your counters as part of a thorough cleaning, it can leave permanent scratches. Abrasive cleaning products and scouring pads easily scrape countertops.
It’s not a game of chance to maintain spotless counters. It’s possible, but only with practice and training.
Benefits of Marble
Elegant Look
The timeless beauty and elegance of marble have been adored for millennia. It’s one of those stones that always stays in style. Every slab of marble is a work of art in its own right. Adding marble flooring may improve the look and feel of any area. Home value can also be increased by installing marble worktops or flooring. Even if there is no natural light in a room, marble can make it seem more cheerful.
Timeless
Due to its durability and beauty, marble has been used for building since ancient times. Marble has been used to construct several iconic buildings that have lasted the test of time, including the Washington Monument, the Parthenon, the Taj Mahal, and the Lincoln Memorial. With the right upkeep, they continue to amaze centuries after they were first created. The timeless beauty of marble makes it a wise choice for any home improvement project.
Affordable
Despite its upscale appearance, Marble is more affordable than granite and other natural stones. The “softer” nature of marble makes it more manageable to work with than harder stones. Because of this capability, marble production and personalisation costs can be reduced, making the material more accessible and affordable.
Durability
Marble is exceptionally long-lasting and difficult to damage, including cracking, fracturing, or scratching. Marble flooring is a good choice for high-traffic areas since it can withstand being walked on and scooted by chairs. Because it neither absorbs nor radiates heat, marble’s cool surface makes it difficult to burn on.
Easy To Clean
If the surface is sealed, washing marble stone is easier than cleaning other types of stone. It can be easily cleaned after a spill because it is water-resistant. However, marble floor cleaners must be non-abrasive to avoid damaging the sealing or stone.
Conclusion
This guide provides a comprehensive guide on how to clean marble at home, focusing on daily maintenance and cleaning methods. The first step is to use mild dish soap and water to clean marble surfaces. This can be done by spraying mild dish soap in warm water and wiping it down with a microfiber towel. Avoid using acidic cleaners like lemon juice and vinegar, as marble is sensitive to them.
To remove soap residue, use a damp cloth to wipe the area down. If mopping a marble floor, start with a fresh mop head or squeeze the water out of the old one very well. Wipe off the marble countertop with a dry towel to ensure no lingering water spots are left.
Once a week, use commercial marble cleaner instead of dish soap. Apply the cleaner in a thin, even coat by spraying it on the surface and rubbing it in using a dry cloth. Always read and follow the specific instructions on the cleaner’s container.
Ammonia and hydrogen peroxide at a concentration of 12% can remove organic stains, such as coffee, tea, and food stains. Baking soda and hydrogen peroxide can be blended into a thick paste to remove cooking oil, grease, and cosmetic stains. The discolouration can be removed the next day by scraping the dry material of the marble with a plastic putty knife.
Rust stains can be removed using a poultice containing rust remover. Use equal portions of poultice powder and rust remover to make a rust-removing poultice and leave it to dry overnight. Another poultice application may be necessary if the stain persists.
Polishing powder for marble can remove etch marks by lightly dusting it over the area where the marks were made. Wet a microfiber cloth corner to massage the powder into the stone and rub it circularly. The etch mark will be erased, and the marble will shine if you continue to rub the powder.
To fix minor dings and scratches, sprinkle polishing compounds on the damaged area. Apply the compound to the marble in circular motions, then wipe away the remaining powder. Larger surfaces, such as marble floors or large tabletops, can benefit from faster application of polishing powder when using a rotary buffer.
Steel wool can be used to remove surface scratches from marble countertops, but it is abrasive and may scratch the marble. To avoid scratches, keep the steel wool damp and inspect the surface regularly. If the scratches are too deep or large, call a professional for restoration.
To prevent damage, clean up spills as soon as you notice them by blotting off excess moisture and using a paper towel to dry the marble. Place everything you want to protect your marble surfaces on coasters or trays to prevent water spots when entertaining with cups and mugs, and use a tray to safeguard your marble bathroom counter when making a creative display of toiletries.
Do not place hot cookware directly on marble countertops; use heated pads made of wood or fabric to protect your surfaces from the stone.
Knowing the proper care and cleaning procedures for marble countertops is essential if you have them in your house. Marble countertops are easy to clean, but it is necessary to retain their lustre and beauty for as long as possible.
Marble has several benefits, including an elegant look, timeless beauty, affordability, durability, and ease of cleaning. Its timeless beauty has made it a wise choice for home improvement projects, and its affordability makes it more accessible than granite and other natural stones.
Marble is exceptionally long-lasting and difficult to damage, including cracking, fracturing, or scratching. It is a good choice for high-traffic areas since it can withstand being walked on and scooted by chairs. Its cool surface makes it difficult to burn on.
Easy to clean: If the surface is sealed, washing marble stone is easier than cleaning other types of stone. However, marble floor cleaners must be non-abrasive to avoid damaging the sealing or stone.
Content Summary:
- Soft marble is more likely to get soiled or scratched, but a soft cloth, soapy water, or a stone cleaner can clean it.
- Knowing how to properly care for marble before using anything other than water to clean it at home is important.
- What follows is a guide that will show you how to clean your home daily and eliminate unsightly blemishes and scratches.
- Clean a marble floor with soapy water and a bigger microfiber cloth.
- Wipe the area down with a clean, wet, non-abrasive cloth.
- Use A Microfiber Towel To Wipe Off The Marble countertop.
- Apply your marble cleaner in a thin, even coat by spraying it on the surface.
- Apply the cleaner to your marble by rubbing it in using a dry cloth, such as a microfiber towel.
- Wet marble surfaces with hair-bleaching hydrogen peroxide and a few drops of ammonia to remove coffee, tea, and food stains.
- Baking soda and hydrogen peroxide can be blended into a thick paste to remove cooking oil, grease, and cosmetic stains.
- The stain will fade, and the marble will lighten with baking soda and peroxide.
- First, ensure that the mixture of peroxide and baking soda will not leave any marks or harm on the marble by testing it in a discrete surface area.
- Use equal portions of poultice powder and rust remover to make a rust-removing poultice.
- Completely cover the rust stain with the poultice and leave it to dry overnight.
- Another poultice application may be necessary if the rust stain on your marble persists.
- Lightly dust some marble polishing powder over the area where you made the etch marks.
- Larger surfaces, such as a marble floor or a huge tabletop, can benefit from the faster application of polishing powder when using a rotary buffer.
- Steel Wool Can Be Used To Remove Surface Scratches.
- Avoid scratching your countertops by keeping the steel wool damp.
- Testing the steel wool on an inconspicuous part of the marble before putting it on a scratch is recommended.
- Clean the surface with water after blotting off excess moisture to remove residue.
- After that, use a paper towel to dry your marble.
- Coasters can protect your marble surfaces from water rings left by glasses and cups.
- Marble countertops are susceptible to damage from hot cookware.
- Use a heated pad made of wood or fabric to protect your surfaces from the stone.
- Knowing the proper care and cleaning procedures for your marble countertops is essential if you are fortunate enough to have them in your house.
- Taking precautions to avoid spills and stains is a simple method to maintain clean countertops.
- Seal your marble counters and wipe up any spills immediately.
- Cleaning marble countertops is as simple as using a chamois, a soft cloth, warm water, and a non-abrasive, high-end cleaning product.
- Use only high-quality cleaning chemicals on your marble countertops to preserve their beauty.
- Using all-purpose cleaners on your countertops might harm them over time and reduce their lustre.
- Choose your agents carefully.
- While it may be tempting to use abrasive cleaning equipment on your counters as part of a thorough cleaning, it can leave permanent scratches.
- Abrasive cleaning products and scouring pads easily scrape countertops.
- It’s not a game of chance to maintain spotless counters.
- It’s one of those stones that always stays in style.
- Every slab of marble is a work of art in its own right.
- Adding marble flooring may improve the look and feel of any area.
- Home value can also be increased by installing marble worktops or flooring.
- Due to its durability and beauty, marble has been used for building since ancient times.
- Marble has been used to construct several iconic buildings that have lasted the test of time, including the Washington Monument, the Parthenon, the Taj Mahal, and the Lincoln Memorial.
- The timeless beauty of marble makes it a wise choice for any home improvement project.
- Despite its upscale appearance, Marble is more affordable than granite and other natural stones.
- If the surface is sealed, washing marble stone is easier than cleaning other types of stone.
- However, marble floor cleaners must be non-abrasive to avoid damaging the sealing or stone.
FAQs About Masonry
Are There Commercial Products Specifically For Marble Cleaning?
Yes, there are many commercial marble cleaners available that are formulated to effectively clean marble without causing harm.
Can I Use A Steam Cleaner On Marble Surfaces?
Using steam cleaners on marble is generally not advisable, as the heat and moisture can damage the stone’s finish and cause issues over time.
What’s The Purpose Of Using Ph-Neutral Cleaners On Marble?
pH-neutral cleaners are gentle on marble and won’t react with the calcium carbonate in the stone, which could lead to etching and damage.
How Often Should I Clean Marble Surfaces?
Regular cleaning is recommended, depending on usage. High-traffic areas need cleaning more frequently, while less-used areas can be cleaned less often.
Is It Necessary To Rinse The Marble After Cleaning?
It’s a good practice to wipe down the marble after cleaning to remove any residue from the cleaning solution. Rinse with clean water and dry to prevent water spots.